Silver


Tile Adhesive is a grey, high polymer modified, cement-based tile adhesive, suitable for fixing tiles & natural stones in interior situations. For exterior applications and more difficult and demanding situations eg: vitrified tiles, glass mosaics,external cladding, swimming pools, etc. consult ULTRA FIX regarding use of a higher performance adhesive.

Characteristics:



Polymer Modified

Good shear bond strength

Excellent grip for porcelain tiles

Smooth creamy formula

Good work ability

Easy to use

Can be used indoors and outdoors

Best price / quality ratio

  • Recommended Substrates
  • Coverage
  • Technical Specification
  • Typical Value

Recommended Substrates

Recommended Substrates

Cured concrete

Masonry blocks

Gypsum wallboard

Cement backer - board

Terrazzo floors

Existing glazed floor tiles

Coverage

Coverage

This will depend on the nature and flatness of the surface and the method of application. It may cover approximately 50 to 60 sq.ft per 20 kg bag for bed thickness of 3mm. For good coverage, it is vitally important that all surfaces should be clean, smooth, plumb, level and free from defects and undulation.

Technical Specification

Bed Thickness Walls* Floors* Mix Proportions(By Weight) Open Time Pot Life at
27 ⁰ + 2⁰ C
Setting Time at
27 ⁰ + 2⁰ C
Temperature Resistance
3-6mm Use Thin-Bed Trowel Use Thick-Bed Trowel 1p.b.w Water
3 p.b.w. Adhesive
10-15 minutes 3 hours 24 hours -30⁰ C to 150⁰C

* Suitability depends on surface level/flatness p.b.w = Parts by Weight

Typical Value

Results at 27± 2⁰C Tensile Adhesion (14 day air) Shear Adhesion
Dry Condition (kN) Wet Condition (kN) Dry Condition (kN) Wet Condition (kN) Heat Condition (kN)
Silver 1.00 0.75 10.00 6.50 6.50
BS.5980:1980 minimum 0.95 0.56 8.90 4.50 4.50
IS 15477:2004 minimum type1 0.75 0.45 1 Day Air 14 Day Air 7 Day Air/ 7 Day Wet 7 Day Air/ 7 Day Heat
2.50 8.00 4.00 4.00